SN74LVC374ANSRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC374ANSRG4 Overview
The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. It is contained within the Tape & Reel (TR)package. It is configured with Tri-State, Non-Invertedas an output. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 100MHzin the output frequency of the device. A total of 1elements are present in it. It consumes 10μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. The 74LVC374 family contains it. The power source is powered by 1.8V. Its input capacitance is 4pF farads. LVC/LCX/Zis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. This board has 20 pins. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. 8bits are used in its design. There is a 3.6Vmaximum supply voltage (Vsup). Despite its superior flexibility, it relies on 8 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TR. The power supply is 3.3V. A total of 2ports are embedded in the D flip flop. With a current output of 24mA , it offers maximum design flexibility.
SN74LVC374ANSRG4 Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
3.3V power supplies
SN74LVC374ANSRG4 Applications
There are a lot of Texas Instruments SN74LVC374ANSRG4 Flip Flops applications.
- Buffer registers
- Pattern generators
- Buffered Clock
- Bus hold
- Storage registers
- Functionally equivalent to the MC10/100EL29
- Power down protection
- Divide a clock signal by 2 or 4
- Single Down Count-Control Line
- ESD protection
