SN74LVC4245APWTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 5V SUPPLY FOR PORT A; 3.3V SUPPLY FOR PORT B |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Output Type | Voltage |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 6.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | 3V & 5V |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LVC4245APWTE4 Overview
Embedded in the TSSOP package, it is available for you to use.The package is in the form of Tape and Reel.This output uses Voltage.1 circuits are used to provide this superior level of flexibility.A transmission line can be terminated with 24 terminations.In order to power the device, a voltage supply of 3.3V is required.The pin count of this device is 24.Level translators is designed wLevel translatorsh 24 pins.Electronic parts with 8 bits are designed for this application.5.5V is the maximum supply voltage it can handle.In order for the machine to operate, the supply voltage must be 2.7V.This mount is done using the method of Surface Mount.As part of Bus Driver/Transceivers, this part is included.Level translators uses a logic IC of type BUS TRANSCEIVER.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.Level translators is a member of the LVC/LCX/Z family of electronic devices.Level translators consumes 80μA quiescent current and is not affected by external factors.A 3.3V power supply powers it.5V SUPPLY FOR PORT A; 3.3V SUPPLY FOR PORT B are other characteristics of it.The operating temperature should be higher than -40°C.The operating temperature should be lower than 85°C.In addition to its maximum design flexibility, 24mA features the lowest output current.
SN74LVC4245APWTE4 Features
TSSOP package
1 circuits
24 pin count
24 pins
3.3V power supplies
SN74LVC4245APWTE4 Applications
There are a lot of Texas Instruments SN74LVC4245APWTE4 voltage translators & level shifters applications.
- Tablet
- Eliminate Slow or Noisy Input Signals
- Industrial equipment
- Product Traceability
- Extended Product-Change Notification
- I2C
- Debouncing a mechanical switch
- Products With Many I
- Motor Drives
- Available in Military (-55°C to 125°C)
