SN74LVC541ADWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 20 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 17.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | Buffer, Inverting |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | ENABLE LOW |
| Number of Output Lines | 3 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVC541ADWG4 Overview
Logical driver uses a neat SOIC package. Rail/Tube external packaging. All of the 1 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. LVC/LCX/Z family part. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct -24mA of current. Voltage used to run voltage buffer should be 1.65V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. Wireless transceiver is able to output 3 lines. It is known as a BUS DRIVER logic IC.
SN74LVC541ADWG4 Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
High Level Output: 24mA
Low Level Output: -24mA
BUS DRIVER Logic IC
SN74LVC541ADWG4 Applications
There are a lot of Texas Instruments SN74LVC541ADWG4 Buffers & Transceivers applications.
- Switching system
- Sensor reporting
- Long-distance fiber optic network applications
- Satellite radio receiver
- Wireless access points
- Fiber distributed data interface (FDDI)
- IPTV front end
- Switches/bridges/routers/servers
- Point-to-point networking
- Military satellite communications
