banner_page

SN74LVC573ADBRG4

D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC573 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVC573ADBRG4
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 353
  • Description: D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC573 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 156.687814mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74LVC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number 74LVC573
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 22.8 ns
Turn On Delay Time 2 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Prop. Delay@Nom-Sup 6.9 ns
Control Type ENABLE LOW
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2mm
Length 7.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LVC573ADBRG4 Overview


The package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). The package is in the form of Tape & Reel (TR). There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. Based on the way of Surface Mount, this electronic part is mounted. The supply voltage of the device is 1.65V~3.6V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74LVC family. An electronic part with 8 bits is designed. In this device, there are 20 terminations. This type belongs to the 74LVC573 family. The supply voltage of the device is 3.3V. There are 20 pins attached to it. It is a member of the LVC/LCX/Z family of electronic devices. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. Vsup reaches 3.6V as the maximum supply voltage. It operates from 3.3V power supplies. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Based on its reliable performance, this device is well suited to TR. The 24mA output current gives it maximum design flexibility.

SN74LVC573ADBRG4 Features


20-SSOP (0.209, 5.30mm Width) package
74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
3.3V power supplies

SN74LVC573ADBRG4 Applications


There are a lot of Texas Instruments SN74LVC573ADBRG4 Latches applications.

  • Audio and video switching
  • Parallel data storage
  • Pattern Generators
  • Frequency dividing
  • Automotive Infotainment
  • Up-Down Johnson
  • Buffer register
  • Parallel-to-Serial Data Conversion
  • Automotive ADAS
  • Parallel Input

Write a review

Note: HTML is not translated!
    Bad           Good