SN74LVC573ADGVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 8 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6.9 ns |
| Turn On Delay Time | 2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -24mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVC573ADGVRE4 Overview
In the TFSOP package, it is embedded. As a result, it has a packaging of Tape and Reel. 8 Bits are used in the design of this electronic part. This device is designed with 20 terminations. With a supply voltage of 3.3V, it operates. With 20 pins, it is equipped. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. With the design of the board, there are only 20 pins. The electronic part is mounted using the Surface Mount method. In this device, there are 2 ports. This part can be found within the FF/Latches subcategory. There is 3.3V power supply for it. Based on its reliable performance, this device is well suited to TR. In order to achieve its superior flexibility, 8 circuits are used. 32mA is set as the low level output current. The high level output current is set to -24mA. A temperature below 125°C should be used for operation. It is recommended that the operating temperature be higher than -40°C. There is a maximum supply voltage of 3.6V supported by this device. With a minimum supply voltage of 1.65V, it operates. A BUS DRIVER logic IC is used. The output current of this device is 24mA, which makes it a very flexible design element.
SN74LVC573ADGVRE4 Features
TFSOP package
8 Bits
20 pin count
20 pins
3.3V power supplies
SN74LVC573ADGVRE4 Applications
There are a lot of Texas Instruments SN74LVC573ADGVRE4 Latches applications.
- Ring counter
- Lamp and Display (LED)
- Frequency dividing
- Display driver
- Programmable binary
- Decade counting 7-segment decimal display
- Shift left register
- Accumulator Registers
- A/D converters
- Hammer Device Information
