SN74LVC573ADWR
| Parameters | |
|---|---|
| Quiescent Current | 10μA |
| Turn On Delay Time | 2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 6.9 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 22.8 ns |
SN74LVC573ADWR Overview
20-SOIC (0.295, 7.50mm Width) contains it. The package is in the form of Cut Tape (CT). It uses Tri-State as its output configuration. A D-Type Transparent Latch logic type is used in this electrical device. Electronic components are mounted using the Surface Mount method. A 1.65V~3.6V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. An FPGA of this type belongs to the 74LVC series. There are 8 bits in this electronic part. This device has 20 terminations. As a member of the 74LVC573 family, it falls under that category. In order to function, the supply voltage should be set to 3.3V. 20 pins are included. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. The device has 20 pins. Surface Mount is the method used for mounting this electronic part. In this device, there are 2 ports. This part is included in Bus Driver/Transceiver. It reaches a maximum supply voltage (Vsup) of 3.6V. A total of 3.3V power supplies are required for it to operate. It contains 8 input lines where electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TR. It features maximum flexibility in design due to 24mA output current. The quiescent current consumed by it is 10μA because it is unaffected by external factors. In addition, BROADSIDE VERSION OF 373 characterize it.
SN74LVC573ADWR Features
20-SOIC (0.295, 7.50mm Width) package
74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
3.3V power supplies
SN74LVC573ADWR Applications
There are a lot of Texas Instruments SN74LVC573ADWR Latches applications.
- Communication systems
- Serial Output Register
- TV Set-top Boxes
- Parallel Input
- Counting
- Data acquisition
- High-speed logic
- Parallel Output
- Up/down difference counting
- Buffer register
