SN74LVC573ADWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 22.8 ns |
| Turn On Delay Time | 2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 6.9 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC573ADWRG4 Overview
20-SOIC (0.295, 7.50mm Width) contains it. A Tape & Reel (TR) package is used to package it. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 1.65V~3.6V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74LVC family. The design of this electronic part is based on 8 bits. This device has been designed with 20 terminations available. As a member of the 74LVC573 family, it falls under that category. With the supply voltage set at 3.3V, it is able to operate. 20 pins are included. It is a member of the LVC/LCX/Z family of electronic devices. The pin configuration of the device is 20. Surface Mount is the method used for mounting this electronic part. This device has 2 ports. This part can be found within the FF/Latches subcategory. 3.6V is the maximum supply voltage (Vsup). There are 3.3V power supplies attached to it. It contains 8 input lines where electronic circuits are present. The device's reliable performance makes it a good choice for TR. The output current of 24mA makes it feature maximum design flexibility. BROADSIDE VERSION OF 373 are other characteristics of it.
SN74LVC573ADWRG4 Features
20-SOIC (0.295, 7.50mm Width) package
74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
3.3V power supplies
SN74LVC573ADWRG4 Applications
There are a lot of Texas Instruments SN74LVC573ADWRG4 Latches applications.
- Clocks
- Digital bus buffer
- Pattern generators
- Multistage ripple counting
- Automotive Cluster
- Lamp and Display (LED)
- Control circuits
- Relay replacement
- Shift left register
- Up-Down Johnson
