SN74LVC573AGQNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 21.687385mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 22.8 ns |
| Turn On Delay Time | 2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 6.9 ns |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVC573AGQNR Overview
There is an embedded version of it in package 20-VFBGA. As a result, it has a packaging of Cut Tape (CT). There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. A temperature of -40°C~85°C is used for operation. The 74LVC series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. There is no doubt that it belongs to the family 74LVC573. In order to function, the supply voltage should be set to 3.3V. There are 20 pins attached to it. It is part of the family of electronic devices called LVC/LCX/Z. This board has 20 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. 2 ports are available on this device. FF/Latches is the subcategory of this part. There are 3 input lines in which electronic circuits are present. Based on its reliable performance, this device is well suited to TAPE AND REEL.
SN74LVC573AGQNR Features
20-VFBGA package
74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
SN74LVC573AGQNR Applications
There are a lot of Texas Instruments SN74LVC573AGQNR Latches applications.
- Relay
- Buffer/Storage Registers
- Communication systems
- Serial Output Data Queuing
- Automotive Cluster
- A/D and D/A conversion
- Programmable binary
- Frequency
- Automotive ADAS
- Audio and video switching
