SN74LVC573AQDWREP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6.9 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVC573AQDWREP Overview
20-SOIC (0.295, 7.50mm Width) contains it. Tape & Reel (TR) is the packaging method. The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates with a supply voltage of 2V~3.6V. The operating temperature is -40°C~125°C. In the 74LVC series, this FPGA is located. The electronic part in this image has 8 bits. This device has 20 terminations. 74LVC573 is its family. In order to operate it, the supply voltage must be 2.7V. 20 pins are included. This electronic device is categorized as a LVC/LCX/Z electronic device. There are 20 pins on it. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. It reaches a maximum supply voltage (Vsup) of 3.6V. There is 3.3V power supply for it. A supply voltage (Vsup) greater than 2V is required. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. With an output current of 24mA, it is highly flexible in terms of design. 8 output lines provide binary equivalents of input lines. This element consists of 1.
SN74LVC573AQDWREP Features
20-SOIC (0.295, 7.50mm Width) package
74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LVC573AQDWREP Applications
There are a lot of Texas Instruments SN74LVC573AQDWREP Latches applications.
- Audio and video switching
- Serial Input
- Pattern generators
- Buffer Storage
- Shift register
- Registers
- TV Set-top Boxes
- Multi-line decoders
- Programmable binary
- Shift Registers
