Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
495.011023mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, 74LVC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LVC573 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
6.9 ns |
Turn On Delay Time |
2 ns |
Family |
LVC/LCX/Z |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW/HIGH |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Translation |
N/A |
Delay Time - Propagation |
1ns |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LVC573AQDWRQ1 Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. A package of Tape & Reel (TR) has been used. Tri-State is the output configured for it. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. A voltage of 2V~3.6V is used as the supply voltage for this device. The temperature at which the machine is operating is -40°C~125°C. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74LVC573 family, it falls under that category. With a supply voltage of 2.7V, it operates. It has 20 pins that makes it easy to use. In terms of electronic devices, this one is in the LVC/LCX/Z family. In addition, it is designed with a pin number of 20. Surface Mount is used to mount this electronic part. This device has 2 ports. In the subcategory FF/Latches, this part belongs. It reaches a maximum supply voltage (Vsup) of 3.6V. There are 3.3V power supplies required for this machine to operate. It is recommended that the supply voltage (Vsup) be greater than 2V. There are electronic circuits attached to the 8 input lines. Based on its reliable performance, this device is appropriate for TR. It features maximum flexibility in design due to 24mA output current.
SN74LVC573AQDWRQ1 Features
20-SOIC (0.295, 7.50mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
3.3V power supplies
SN74LVC573AQDWRQ1 Applications
There are a lot of Texas Instruments SN74LVC573AQDWRQ1 Latches applications.
- Frequency
- Network Switches
- Parallel Input
- Pattern Generators
- A/D and D/A conversion
- Automotive ADAS
- Double bus register system
- Digital bus buffer
- Programmable binary
- Up/down difference counting