Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.600411mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, 74LVC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LVC573 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
6.9 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
2 ns |
Family |
LVC/LCX/Z |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW/HIGH |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Translation |
N/A |
Delay Time - Propagation |
1ns |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LVC573AQPWRQ1 Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. As a result, it has a packaging of Tape & Reel (TR). Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. There is no supply voltage for this device. During operation, the temperature is set at -40°C~125°C. It is a type of FPGA belonging to the Automotive, AEC-Q100, 74LVC series. An electronic part with 8 bits is designed. This device has been designed with 20 terminations available. There is no doubt that it belongs to the family 74LVC573. In order to function, the supply voltage should be set to 2.7V. There are 20 pins attached to it. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. In addition, it is designed with a pin number of 20. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. The part belongs to the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 3.6V. There are 3.3V power supplies required for this machine to operate. (Vsup) should be greater than 2V. An electronic circuit can be found on 8 input lines. Based on its reliable performance, this device is well suited to TR. It consumes 10μA of quiescent current without being affected by external factors.
SN74LVC573AQPWRQ1 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
3.3V power supplies
SN74LVC573AQPWRQ1 Applications
There are a lot of Texas Instruments SN74LVC573AQPWRQ1 Latches applications.
- Pseudo-random code generators
- Shift register
- Hammer
- Synchronous frequency dividers
- Display driver
- A/D and D/A conversion
- Avionics
- Counting
- OC-48 communication systems
- High-speed logic