SN74LVC574ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 7.8 ns |
| Quiescent Current | 1.5μA |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC574ADGVR Overview
In the form of 20-TFSOP (0.173, 4.40mm Width), it has been packaged. You can find it in the Cut Tape (CT)package. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. A temperature of -40°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LVC series. Its output frequency should not exceed 150MHz. The element count is 1 . Despite external influences, it consumes 10μAof quiescent current. Terminations are 20. JK flip flop belongs to 74LVC574 family. Power is provided by a 1.8V supply. A 4pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of LVC/LCX/Z. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. This flip flop is designed with 8 Bits. Due to its superior flexibility, it uses 8 circuits. This D flip flop is well suited for TR based on its reliable performance. The D flip flop has no ports embedded. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. This input has 3lines in it. There is 1.5μA quiescent current consumption by it.
SN74LVC574ADGVR Features
Cut Tape (CT) package
74LVC series
20 pins
8 Bits
SN74LVC574ADGVR Applications
There are a lot of Texas Instruments SN74LVC574ADGVR Flip Flops applications.
- Count Modes
- Memory
- Computers
- Frequency Dividers
- Frequency Divider circuits
- Guaranteed simultaneous switching noise level
- Data Synchronizers
- Power down protection
- Registers
- Asynchronous counter
