SN74LVC574ADWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 21.6 ns |
| Quiescent Current | 1.5μA |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC574ADWR Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. A package named Cut Tape (CT)includes it. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~3.6V. Currently, the operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74LVCseries of FPGAs. A frequency of 150MHzshould not be exceeded by its output. A total of 1 elements are present. The number of terminations is 20. You can search similar parts based on 74LVC574. It is powered from a supply voltage of 1.8V. Input capacitance of this device is 4pF farads. It is a member of the LVC/LCX/Zfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latches. Flip flops designed with 8bits are used in this part. Due to its superior flexibility, it uses 8 circuits. Due to its reliability, this T flip flop is well suited for TR. The flip flop has 2embedded ports. As a result of its output current of 24mA, it is very flexible in terms of design. This input has 3lines. There is 1.5μA quiescent current consumption by it.
SN74LVC574ADWR Features
Cut Tape (CT) package
74LVC series
20 pins
8 Bits
SN74LVC574ADWR Applications
There are a lot of Texas Instruments SN74LVC574ADWR Flip Flops applications.
- Matched Rise and Fall
- CMOS Process
- Guaranteed simultaneous switching noise level
- Common Clocks
- Pattern generators
- Balanced 24 mA output drivers
- Memory
- Functionally equivalent to the MC10/100EL29
- Frequency Dividers
- QML qualified product
