SN74LVC574ADWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC574ADWRE4 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 1.65V~3.6Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 150MHz. The element count is 1 . It consumes 10μA of quiescent current without being affected by external factors. 20terminations have occurred. If you search by 74LVC574, you will find similar parts. It is powered from a supply voltage of 1.8V. There is 4pF input capacitance for this T flip flop. Electronic devices of this type belong to the LVC/LCX/Zfamily. It is mounted by the way of Surface Mount. A total of 20pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. Its flexibility is enhanced by 8 circuits. Considering the reliability of this T flip flop, it is well suited for TR. A D flip flop with 2embedded ports is available. The 24mA output current allows it to be designed with the greatest amount of flexibility. Currently, there are 3 input lines present.
SN74LVC574ADWRE4 Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
SN74LVC574ADWRE4 Applications
There are a lot of Texas Instruments SN74LVC574ADWRE4 Flip Flops applications.
- Individual Asynchronous Resets
- Frequency Divider circuits
- Single Down Count-Control Line
- Buffer registers
- Memory
- ESCC
- QML qualified product
- Memory
- Reduced system switching noise
- Divide a clock signal by 2 or 4
