SN74LVC574AN
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
SN74LVC574AN Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Through Holeis in the way of this electric part. The JK flip flop operates with an input voltage of 1.65V~3.6V volts. Currently, the operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LVC series. Its output frequency should not exceed 150MHz. D latch consists of 1 elements. During its operation, it consumes 10μA quiescent energy. There are 20 terminations,The 74LVC574 family contains this object. The power source is powered by 1.8V. There is 4pF input capacitance for this T flip flop. A device of this type belongs to the family of LVC/LCX/Z. Electronic part Through Holeis mounted in the way. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. The flip flop is designed with 8bits. In order to achieve its superior flexibility, 8 circuits are used. This D flip flop is equipped with 0 ports. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. A total of 3input lines have been provided.
SN74LVC574AN Features
Tube package
74LVC series
20 pins
8 Bits
SN74LVC574AN Applications
There are a lot of Texas Instruments SN74LVC574AN Flip Flops applications.
- QML qualified product
- Clock pulse
- Data Synchronizers
- Parallel data storage
- Modulo – n – counter
- Circuit Design
- ATE
- Event Detectors
- Computing
- Power down protection
