SN74LVC74ADBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC74ADBRG4 Overview
14-SSOP (0.209, 5.30mm Width)is the packaging method. D flip flop is included in the Tape & Reel (TR)package. There is a Differentialoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~3.6Vvolts. -40°C~125°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74LVC series. You should not exceed 100MHzin its output frequency. As a result, it consumes 10μA quiescent current. Currently, there are 14 terminations. The 74LVC74 family contains it. The D flip flop is powered by a voltage of 1.8V . JK flip flop input capacitance is 5pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 14. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). 2 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for TR. The D latch operates on 3.3V volts. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 1 output lines on it.
SN74LVC74ADBRG4 Features
Tape & Reel (TR) package
74LVC series
14 pins
3.3V power supplies
SN74LVC74ADBRG4 Applications
There are a lot of Texas Instruments SN74LVC74ADBRG4 Flip Flops applications.
- Shift Registers
- Registers
- Safety Clamp
- Storage Registers
- Individual Asynchronous Resets
- ESD protection
- Storage registers
- High Performance Logic for test systems
- Memory
- Data transfer
