SN74LVC74ADRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC74ADRE4 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Differential. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 1.65V~3.6V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. Its output frequency should not exceed 100MHz. As a result, it consumes 10μA of quiescent current without being affected by external factors. A total of 14 terminations have been made. This D latch belongs to the family of 74LVC74. The power source is powered by 1.8V. JK flip flop input capacitance is 5pF farads. The electronic device belongs to the LVC/LCX/Zfamily. It is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latch. In this case, the maximum supply voltage (Vsup) reaches 3.6V. 2 circuits are used to achieve its superior flexibility. On the basis of its reliable performance, this D flip flop is well suited for use with TR. A total of 3.3V power supplies are needed to run it. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 1 output lines in this JK flip flop.
SN74LVC74ADRE4 Features
Tape & Reel (TR) package
74LVC series
14 pins
3.3V power supplies
SN74LVC74ADRE4 Applications
There are a lot of Texas Instruments SN74LVC74ADRE4 Flip Flops applications.
- Test & Measurement
- Automotive
- Convert a momentary switch to a toggle switch
- 2 – Bit synchronous counter
- Power down protection
- Set-reset capability
- ESD performance
- Frequency division
- Shift registers
- Frequency Dividers
