SN74LVC74ADRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC74ADRG4 Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop uses Differentialas the output. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 1.65V~3.6V. -40°C~125°C TAis the operating temperature. D-Typeis the type of this D latch. This type of FPGA is a part of the 74LVC series. It should not exceed 100MHzin terms of its output frequency. There is a consumption of 10μAof quiescent energy. There have been 14 terminations. The 74LVC74 family contains it. Power is supplied from a voltage of 1.8V volts. Its input capacitance is 5pF farads. A device of this type belongs to the family of LVC/LCX/Z. Surface Mount mounts this electronic component. With its 14pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Vsup reaches its maximum value at 3.6V. Its superior flexibility is attributed to its use of 2 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The D latch runs on a voltage of 3.3V volts. The output current of 24mA makes it feature maximum design flexibility. It operates with 1 output lines.
SN74LVC74ADRG4 Features
Tape & Reel (TR) package
74LVC series
14 pins
3.3V power supplies
SN74LVC74ADRG4 Applications
There are a lot of Texas Instruments SN74LVC74ADRG4 Flip Flops applications.
- ESD protection
- Bounce elimination switch
- Guaranteed simultaneous switching noise level
- Synchronous counter
- Reduced system switching noise
- Buffer registers
- Storage Registers
- Pattern generators
- Buffered Clock
- Digital electronics systems
