SN74LVC74ADTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Frequency | 150MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Number of Bits | 1 |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Logic IC Type | D FLIP-FLOP |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVC74ADTG4 Overview
The package is in the form of SOIC. A package named Tape & Reel (TR)includes it. A total of 2elements are contained within it. There have been 14 terminations. The power supply voltage is 1.8V. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. The 14pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part with 1bits has been designed. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. A total of 1input lines have been provided. A high level output current of -24mAis set. It is set to 24mAfor low level output current. Ideally, the operating temperature should be below 125°C. It is recommended that the operating temperature be greater than -40°C. It is powered by 1.65V as its minimum supply voltage. A maximum voltage of 3.6V can be provided by it. A frequency of 150MHzcan be achieved. This logic IC is D FLIP-FLOP. There are 2 functions associated with the JK flip flop. It is equipped with 14 pins. This flip flop features a maximum design flexibility due to its output current of 24mA.
SN74LVC74ADTG4 Features
Tape & Reel (TR) package
14 pins
1 Bits
3.3V power supplies
2 Functions
14 pin count
SN74LVC74ADTG4 Applications
There are a lot of Texas Instruments SN74LVC74ADTG4 Flip Flops applications.
- Synchronous counter
- Cold spare funcion
- Data Synchronizers
- Registers
- Load Control
- Memory
- Balanced Propagation Delays
- Pattern generators
- High Performance Logic for test systems
- Counters
