SN74LVC74APWTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC74APWTG4 Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 1.65V~3.6Vis required for its operation. It is at -40°C~125°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. The 74LVCseries comprises this type of FPGA. A frequency of 100MHzshould be the maximum output frequency. This process consumes 10μA quiescents. Currently, there are 14 terminations. D latch belongs to the 74LVC74 family. The power supply voltage is 1.8V. A 5pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. This board is designed with 14pins on it. This device has Positive Edgeas its clock edge trigger type. This device is part of the FF/Latchesbase part number family. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). Due to its superior flexibility, it uses 2 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. In order for the device to operate, it requires 3.3V power supplies. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. It has 1 output lines to operate.
SN74LVC74APWTG4 Features
Tape & Reel (TR) package
74LVC series
14 pins
3.3V power supplies
SN74LVC74APWTG4 Applications
There are a lot of Texas Instruments SN74LVC74APWTG4 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Data Synchronizers
- Digital electronics systems
- Individual Asynchronous Resets
- Shift registers
- Buffer registers
- ESCC
- Cold spare funcion
- Single Up Count-Control Line
- Reduced system switching noise
