SN74LVC74AQPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 56.812444mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Base Part Number | 74LVC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 100MHz |
| Propagation Delay | 6.4 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC74AQPWRQ1 Overview
The item is packaged in 14-TSSOP (0.173, 4.40mm Width)cases. It is included in the package Tape & Reel (TR). Differentialis the output configured for it. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. In this case, the operating temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the Automotive, AEC-Q100, 74LVC series. You should not exceed 100MHzin its output frequency. As a result, it consumes 10μA of quiescent current without being affected by external factors. There have been 14 terminations. If you search by 74LVC74, you will find similar parts. It is powered by a voltage of 2.7V . There is 5pF input capacitance for this T flip flop. The electronic device belongs to the LVC/LCX/Zfamily. This electronic part is mounted in the way of Surface Mount. There are 14pins on it. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. There is a 3.6Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. The superior flexibility of this product is achieved by using 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The D latch runs on a voltage of 3.3V volts. To operate, the chip has a total of 1 output lines.
SN74LVC74AQPWRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
14 pins
3.3V power supplies
SN74LVC74AQPWRQ1 Applications
There are a lot of Texas Instruments SN74LVC74AQPWRQ1 Flip Flops applications.
- Set-reset capability
- Functionally equivalent to the MC10/100EL29
- Frequency Dividers
- Matched Rise and Fall
- ESCC
- ESD performance
- Circuit Design
- Control circuits
- Event Detectors
- Computers
