SN74LVC821ADBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 10 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7.3ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 10 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC821ADBRG4 Overview
24-SSOP (0.209, 5.30mm Width)is the way it is packaged. Package Tape & Reel (TR)embeds it. T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 1.65V~3.6Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74LVC series. It should not exceed 150MHzin terms of its output frequency. D latch consists of 1 elements. As a result, it consumes 10μA of quiescent current without being affected by external factors. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74LVC821 family. Power is provided by a 1.8V supply. Its input capacitance is 5pFfarads. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. This electronic part is mounted in the way of Surface Mount. 24pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. An electronic part with 10bits has been designed. Vsup reaches its maximum value at 3.6V. In view of its reliability, this D flip flop is a good fit for TR. It operates from 3.3V power supplies. The flip flop contains 2ports. With an output current of 24mA, this device offers maximum design flexibility. There are 10 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74LVC821ADBRG4 Features
Tape & Reel (TR) package
74LVC series
24 pins
10 Bits
3.3V power supplies
SN74LVC821ADBRG4 Applications
There are a lot of Texas Instruments SN74LVC821ADBRG4 Flip Flops applications.
- QML qualified product
- ESCC
- Single Down Count-Control Line
- Control circuits
- Counters
- Power down protection
- ESD protection
- Bus hold
- Set-reset capability
- Computing
