SN74LVC821APWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Frequency | 150MHz |
| Pin Count | 24 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 10 |
| Prop. Delay@Nom-Sup | 7.3 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVC821APWRG4 Overview
In the form of TSSOP, it has been packaged. It is included in the package Tape & Reel (TR). In total, there are 1 elements. It has been determined that there have been 24 terminations. The D flip flop is powered by a voltage of 1.8V . It belongs to the family of electronic devices known as LVC/LCX/Z. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 24 pins. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It runs on 3.3Vvolts of power. The D flip flop has no ports embedded. High level output current is set to -24mA. In the low level output current setting, 24mAis used. Operating temperatures should be lower than 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. It operates with the minimal supply voltage of 1.65V. 3.6Vis the maximum supply voltage supported by it. 150MHzis the maximum frequency that can be achieved. This logic IC is BUS DRIVER. It has 1 functions. With 24 pins, it is equipped with a low power consumption. Its output current of 24mA allows for maximum design flexibility.
SN74LVC821APWRG4 Features
Tape & Reel (TR) package
24 pins
3.3V power supplies
1 Functions
24 pin count
SN74LVC821APWRG4 Applications
There are a lot of Texas Instruments SN74LVC821APWRG4 Flip Flops applications.
- Load Control
- Matched Rise and Fall
- Synchronous counter
- Counters
- Bus hold
- Divide a clock signal by 2 or 4
- Data Synchronizers
- Bounce elimination switch
- Control circuits
- Cold spare funcion
