SN74LVC823ADBR
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 9 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.9 ns |
| Turn On Delay Time | 1.3 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 8ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
SN74LVC823ADBR Overview
It is packaged in the way of 24-SSOP (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at 1.65V~3.6Vvolts. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop is a part of the 74LVCseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. In total, it contains 1 elements. As a result, it consumes 10μA quiescent current and is not affected by external forces. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74LVC823family make up this object. An input voltage of 1.8Vpowers the D latch. This JK flip flop has a 5pFfarad input capacitance. It belongs to the family of electronic devices known as LVC/LCX/Z. It is mounted in the way of Surface Mount. There are 24pins on it. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. 9bits are used in its design. Due to its reliability, this T flip flop is well suited for TR. A D flip flop with 2embedded ports is available. The output current of 24mA makes it feature maximum design flexibility. It operates with 3 output lines. The number of input lines is 9. There is also a characteristic of WITH CLEAR AND CLOCK ENABLE.
SN74LVC823ADBR Features
Tape & Reel (TR) package
74LVC series
24 pins
9 Bits
SN74LVC823ADBR Applications
There are a lot of Texas Instruments SN74LVC823ADBR Flip Flops applications.
- Common Clocks
- Storage Registers
- Frequency division
- Set-reset capability
- Reduced system switching noise
- Bus hold
- Clock pulse
- Dynamic threshold performance
- Digital electronics systems
- Balanced Propagation Delays
