SN74LVC823ADWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.9 ns |
| Turn On Delay Time | 1.3 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 8ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74LVC823ADWRG4 Overview
It is packaged in the way of 24-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74LVC series. A frequency of 150MHzshould not be exceeded by its output. A total of 1 elements are present. There is a consumption of 10μAof quiescent energy. The number of terminations is 24. The 74LVC823family includes it. It is powered by a voltage of 1.8V . This JK flip flop has a 5pFfarad input capacitance. This D flip flop belongs to the family of LVC/LCX/Z. A part of the electronic system is mounted in the way of Surface Mount. 24pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. The flip flop is designed with 9bits. As soon as 3.6Vis reached, Vsup reaches its maximum value. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It runs on 3.3Vvolts of power. The D flip flop is embedded with 2ports. It operates with 9 output lines. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.
SN74LVC823ADWRG4 Features
Tape & Reel (TR) package
74LVC series
24 pins
9 Bits
3.3V power supplies
SN74LVC823ADWRG4 Applications
There are a lot of Texas Instruments SN74LVC823ADWRG4 Flip Flops applications.
- Data storage
- Frequency Divider circuits
- Convert a momentary switch to a toggle switch
- Digital electronics systems
- Set-reset capability
- QML qualified product
- Instrumentation
- Pattern generators
- Storage Registers
- Buffered Clock
