SN74LVC841ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC841 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 6.7 ns |
| Turn On Delay Time | 2.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Translation | N/A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC841ADBR Overview
In the package 24-SSOP (0.209, 5.30mm Width), it can be found. As a result, it has a packaging of Tape & Reel (TR). It uses Tri-State as the output. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A 1.65V~3.6V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. The 74LVC series is associated with this FPGA. 10 Bits are used in the design of this electronic part. This device is designed with 24 terminations. There is no doubt that it belongs to the family 74LVC841. In order to operate it, the supply voltage must be 1.8V. There are 24 pins on it. LVC/LCX/Z is the family of this electronic device. The device has 24 pins. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. In the subcategory FF/Latches, this part belongs. The reliability of this device makes it well suited to TR. With 24mA, maximum design flexibility is ensured. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. 8 circuits enable it to achieve high performance.
SN74LVC841ADBR Features
24-SSOP (0.209, 5.30mm Width) package
74LVC series
10 Bits
74LVC841 family
24 pin count
24 pins
SN74LVC841ADBR Applications
There are a lot of Texas Instruments SN74LVC841ADBR Latches applications.
- Multi-line decoders
- Parallel Input
- Bus system register with enable parallel lines at bus side
- Shift Registers
- Meter applications
- Automotive Infotainment
- Automotive HEV/EV Powertrain
- Parallel data storage
- Automatic test equipment
- Counting
