SN74LVC841ADGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74LVC841 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 6.7 ns |
| Turn On Delay Time | 2.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC841ADGVR Overview
In the 24-TFSOP (0.173, 4.40mm Width) package, it is embedded. It is packaged in the way of Tape & Reel (TR). In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V, it operates. It operates at -40°C~85°C degrees Celsius. In the 74LVC series, this FPGA is located. An electronic part with 10 bits is designed. In this device, there are 24 terminations that have been designed. The family 74LVC841 includes it. The device is operated when the supply voltage is set to 1.8V. It is equipped with 24 pin count. There is a device in this electronic family called LVC/LCX/Z. It is designed with 24 pins. The electronic part is mounted in a way that corresponds to Surface Mount. 2 ports are available on this device. Subcategory FF/Latches contains this part. Based on its reliable performance, this device is appropriate for TAPE AND REEL. As the output current is 24mA, the design flexibility is maximum. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. 8 circuits are used to achieve superior flexibility.
SN74LVC841ADGVR Features
24-TFSOP (0.173, 4.40mm Width) package
74LVC series
10 Bits
74LVC841 family
24 pin count
24 pins
SN74LVC841ADGVR Applications
There are a lot of Texas Instruments SN74LVC841ADGVR Latches applications.
- Frequency dividing
- Parallel Input
- Programmable binary
- Communication systems
- Shift right with parallel loading
- Hammer
- Shift register
- Frequency
- Registers
- Pattern generators
