SN74LVC841ADWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC841 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 6.7 ns |
| Turn On Delay Time | 2.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 10 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74LVC841ADWR Overview
24-SOIC (0.295, 7.50mm Width) contains it. The package is in the form of Tape & Reel (TR). In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. It operates at -40°C~85°C degrees Celsius. An FPGA of this type belongs to the 74LVC series. An electronic part with 10 bits is designed. A device such as this has 24 terminations designed. The family 74LVC841 includes it. The device works with a voltage of 1.8V for its supply voltage. The 24 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. With the design of the board, there are only 24 pins. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. It reaches 3.6V when the supply voltage (Vsup) reaches maximum. 3.3V power supplies are needed to operate it. On the basis of its reliability, this device is well suited for TAPE AND REEL. 10 output lines generate the binary equivalent of the input lines. A total of 1 elements are contained in it.
SN74LVC841ADWR Features
24-SOIC (0.295, 7.50mm Width) package
74LVC series
10 Bits
74LVC841 family
24 pin count
24 pins
3.3V power supplies
1 elements
SN74LVC841ADWR Applications
There are a lot of Texas Instruments SN74LVC841ADWR Latches applications.
- Meter applications
- Lamp and Display (LED)
- Flip-flops
- Serial Output Register
- Buffer/Storage Registers
- Programmable binary
- Relay replacement
- Double bus register system
- Stacked or Push-Down Registers
- Parallel data synchronization
