Parameters |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
24 |
Weight |
89.499445mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
24 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Pin Count |
24 |
Polarity |
Non-Inverting |
Power Supplies |
3.3V |
Temperature Grade |
INDUSTRIAL |
Number of Circuits |
10 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.65V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
24mA |
Number of Bits |
10 |
Propagation Delay |
8.6 ns |
Turn On Delay Time |
2.7 ns |
Family |
LVC/LCX/Z |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Prop. Delay@Nom-Sup |
6.7 ns |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Independent Circuits |
1 |
Length |
7.8mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74LVC841APWRG4 Overview
The package in which it is embedded is named TSSOP. A Tape and Reel package is used to package it. This electronic part is designed with 10 Bits. A device such as this has 24 terminations designed. It operates with a supply voltage of 1.8V. It is equipped with 24 pin count. In terms of electronic devices, this one is in the LVC/LCX/Z family. With the design of the board, there are only 24 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches includes this part. The system is powered by 3.3V sources. The superior flexibility of the system is achieved through its use of 10 circuits. There is 24mA low level output current set. There is -24mA high level output current set. Lower than 85°C is the recommended operating temperature. Temperatures higher than -40°C should be used for operation. The supply voltage is limited to 3.6V. A voltage of 1.65V is the minimum supply voltage required for it to operate. It uses a logic IC of type BUS DRIVER. The 24mA output current gives it maximum design flexibility.
SN74LVC841APWRG4 Features
TSSOP package
10 Bits
24 pin count
24 pins
3.3V power supplies
SN74LVC841APWRG4 Applications
There are a lot of Texas Instruments SN74LVC841APWRG4 Latches applications.
- Decade counting 7-segment decimal display
- Buffer Storage
- Buffer/Storage Registers
- Up/down difference counting
- Counter timers
- Lamp and Display (LED)
- Automotive HEV/EV Powertrain
- Counting
- A/D and D/A conversion
- Network Switches