SN74LVC8T245DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPEARATE CONFIGURABLE POWER-SUPPLY RAILS FOR PORT A AND B |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Current - Output | 32mA |
| Number of Bits | 8 |
| Propagation Delay | 4.2 ns |
| Quiescent Current | 15μA |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 500 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| Prop. Delay@Nom-Sup | 6.3 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LVC8T245DBRE4 Overview
A package called SSOP contains it.Packaged as Tape & Reel (TR).0 terminations are used to end transmission lines.A supply voltage of 1.8V is used to power the device.A total of 24 pins are included.With 24 pins, it is designed.There are 8 bits in this electronic part, which means it is designed in such a way.Level translators supports a maximum supply voltage of 5.5V.A voltage of 1.65V is the minimum supply voltage required for it to operate.This mount is done using the method of Surface Mount.There are no channels.As part of Bus Driver/Transceiver, this part is included.As for the logic IC it uses, it is a BUS TRANSCEIVER.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.LVC/LCX/Z is the family name of this electronic device.Without external influence, it consumes 15μA of quiescent current.3.3V power supplies are required to run it.Considering its reliability, this device is appropriate for TAPE AND REEL.TWO SEPEARATE CONFIGURABLE POWER-SUPPLY RAILS FOR PORT A AND B are other characteristics of it.Level translators is recommended that the operating temperature be higher than -40°C.The operating temperature should be lower than 85°C.Level shifter offers maximum design flexibilLevel shiftery wLevel shifterh 32mA output current.
SN74LVC8T245DBRE4 Features
SSOP package
24 pin count
24 pins
3.3V power supplies
SN74LVC8T245DBRE4 Applications
There are a lot of Texas Instruments SN74LVC8T245DBRE4 voltage translators & level shifters applications.
- Industrial equipment
- UART
- Eliminate slow or noisy input signals
- Enterprise and communications
- Advanced Driver Assistance System (ADAS)
- Infotainment Head Unit
- Signaling Level Conversion for Clock or Data
- Debouncing a mechanical switch
- LCD Panels Using GIP / GOA / ASG Technology
- MDIO
