SN74LVCC3245APWTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 3V TO 5.5V SUPPLY FOR PORT B |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Output Type | Voltage |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 14.5 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 2.4 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 200 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Prop. Delay@Nom-Sup | 7.6 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | 3V & 3/5V |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LVCC3245APWTE4 Overview
In the TSSOP package, it is embedded.A Tape and Reel package is used to package it.Voltage is used for the output it is configured with.To end a transmission line, there are 24 types of termination that can be used.In order to power the device, a voltage supply of 3.3V is required.There are 24 pins on it.In addition, it is designed with a pin number of 24.There are 8 bits in this electronic part, which means it is designed in such a way.Voltages up to 5.5V can be supplied.Level translators operates wLevel translatorsh the minimal supply voltage of 2.3V.The way of mounting this electronic part is Surface Mount.As part of Bus Driver/Transceivers, it belongs.Level translators uses a logic IC of type BUS TRANSCEIVER.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.In terms of electronic devices, this one is in the LVC/LCX/Z family.Without external influences, it consumes 80μA of quiescent current.Power comes from a 3.3V supply.Level translators is also characterized by ALSO REQUIRES 3V TO 5.5V SUPPLY FOR PORT B.Temperatures higher than -40°C should be used for operation.The operating temperature should be lower than 85°C.This device contains 1 elements in its design.Because it features 24mA output current, maximum design flexibility can be achieved.
SN74LVCC3245APWTE4 Features
TSSOP package
24 pin count
24 pins
3.3V power supplies
1 elements
SN74LVCC3245APWTE4 Applications
There are a lot of Texas Instruments SN74LVCC3245APWTE4 voltage translators & level shifters applications.
- Desktop PC
- PMBus
- Motor Drives
- Enterprise and communications
- Controlled Baseline
- Automotive
- One Assembly
- UART
- ADAS Fusion
- Debouncing a mechanical switch
