Parameters |
Quiescent Current |
8μA |
Turn On Delay Time |
10.2 ns |
Family |
LVC/LCX/Z |
Logic Function |
Transceiver, Translator |
Data Rate |
200 Mbps |
Direction |
Bidirectional |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Control Type |
COMMON CONTROL |
Translation |
N/A |
Height Seated (Max) |
2mm |
Width |
5.3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
24 |
Weight |
170.01209mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
24 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Pin Count |
24 |
Output Type |
Voltage |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Power Supplies |
3.35V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
24mA |
Number of Bits |
8 |
Propagation Delay |
7 ns |
SN74LVCC4245ADBRG4 Overview
In the package SSOP, it can be found.Tape and Reel is the packaging method.The output it is configured with uses Voltage.Usually, when a transmission line is terminated, there are 24 termination points used.A supply voltage of 3.3V powers it.The pin count of this device is 24.The 24 pins are designed into it.Electronic parts are designed with a number of bits of 8.Level translators supports the maximal supply voltage of 5.5V.In order for the machine to operate, the supply voltage must be 2.7V.This mount is done using the method of Surface Mount.This part is included in Bus Driver/Transceivers.As for the logic IC it uses, it is a BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Despite the fact that it is an electronic device, it belongs to the LVC/LCX/Z family.In the absence of external influences, it consumes 8μA of quiescent current.A 3.35V power supply is required for it to operate.TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V are also a characteristics of it.If the operating temperature is less than -40°C, then the system should not operate.There should be a temperature below 85°C at which the system is operating.In total, it has 1 elements.The output current of 24mA makes it feature maximum design flexibility.
SN74LVCC4245ADBRG4 Features
SSOP package
24 pin count
24 pins
3.35V power supplies
1 elements
SN74LVCC4245ADBRG4 Applications
There are a lot of Texas Instruments SN74LVCC4245ADBRG4 voltage translators & level shifters applications.
- One Fabrication Site
- Tablet PCs
- Wireless and Telecom Infrastructures
- Wearable Health and Fitness Devices
- Controlled Baseline
- SDIO
- Power-sensitive applications
- Eliminate Slow or Noisy Input Signals
- Data and Clock Transmission Over Backplane
- Personal computers