SN74LVCC4245ANSRG4
| Parameters | |
|---|---|
| Package / Case | SOP |
| Number of Pins | 24 |
| Weight | 307.790773mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 24 |
| Output Type | Voltage |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 200 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
SN74LVCC4245ANSRG4 Overview
A package called SOP contains it.Level translators is packaged in the way of Tape and Reel.This output is configured with Voltage.Ending a transmission line involves 24 terminations.Level translators is powered by a 3.3V supply.The pin count of this device is 24.There are 24 pins on it.8 Bits are used in the design of this electronic part.Level translators supports a maximum supply voltage of 5.5V.There is a minimum supply voltage of 2.7V for it.Level translators has been mounted wLevel translatorsh the method of Surface Mount.I would classify it as part of the group of Bus Driver/Transceivers.Level translators uses the logic IC BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.In terms of electronic devices, this one is in the LVC/LCX/Z family.Without external influence, it consumes 8μA of quiescent current.A 3.35V power supply powers it.Its characteristics include TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V.In order for the system to operate properly, the operating temperature should be higher than -40°C.The operating temperature should be lower than 85°C.As far as this device is concerned, it contains 1 elements.Due to its 24mA output current, this device offers maximum design flexibility.
SN74LVCC4245ANSRG4 Features
SOP package
24 pin count
24 pins
3.35V power supplies
1 elements
SN74LVCC4245ANSRG4 Applications
There are a lot of Texas Instruments SN74LVCC4245ANSRG4 voltage translators & level shifters applications.
- Product Traceability
- Driving Indicator LEDs or Buzzers
- Eliminate Slow or Noisy Input Signals
- Test Site
- TVs
- Printers and Other Peripherals
- SDIO
- Controlled Baseline
- Products With Many I
- Notebook
