SN74LVCC4245APWG4
| Parameters | |
|---|---|
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 200 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 90.009736mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Output Type | Voltage |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
SN74LVCC4245APWG4 Overview
Package TSSOP includes it.Packaged as Rail/Tube.This output uses Voltage.Transmission lines can be terminated using 24 terminations to end them.A supply voltage of 3.3V is used to power the device.Pin count is 24.The 24 pins are designed into it.The design of this electronic part is based on 8 bits.Voltages above 5.5V are supported.The minimal voltage for operation is 2.7V.Electronic parts are mounted using Surface Mount.In Bus Driver/Transceivers, this part is included.A BUS TRANSCEIVER logic IC is used.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.Electronic devices like this belong to the family LVC/LCX/Z.Level translators consumes 8μA of quiescent current wLevel translatorshout being affected by external factors. 3.35V power supplies are required to run it.The TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V characteristics are also present.Temperatures higher than -40°C should be used for operation.Operating temperatures should be below 85°C.1 elements are present in it.Due to its 24mA output current, this device offers maximum design flexibility.
SN74LVCC4245APWG4 Features
TSSOP package
24 pin count
24 pins
3.35V power supplies
1 elements
SN74LVCC4245APWG4 Applications
There are a lot of Texas Instruments SN74LVCC4245APWG4 voltage translators & level shifters applications.
- Monitors
- Wearable Health and Fitness Devices
- Available in Military (-55°C to 125°C)
- Products With Many I
- Eliminate slow or noisy input signals
- Power-sensitive applications
- Available in Military (–55°C/125°C) Temperature Range
- Notebook
- Telecom
- TVs
