SN74LVCH16373ADGGR
| Parameters | |
|---|---|
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVCH16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 4.2 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | INDEPENDENT CONTROL |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
SN74LVCH16373ADGGR Overview
48-TFSOP (0.240, 6.10mm Width) contains it. Tape & Reel (TR) is the packaging method. The output it is configured with uses Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. A 1.65V~3.6V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C. An FPGA of this type belongs to the 74LVCH series. An electronic part with 16 bits is designed. This device has been designed with 48 terminations available. 74LVCH16373 is its family. With the supply voltage set at 1.8V, it is able to operate. There are 48 pins attached to it. This electronic device belongs to the family of LVC/LCX/Z. In addition, it is designed with a pin number of 48. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. There should be a voltage supply (Vsup) greater than 1.65V. The device's reliable performance makes it a good choice for TR. The output current of 24mA makes it feature maximum design flexibility. 3 output lines provide binary equivalents of input lines. The quiescent current consumed by it is 20μA because it is unaffected by external factors. 8 circuits enable it to achieve high performance.
SN74LVCH16373ADGGR Features
48-TFSOP (0.240, 6.10mm Width) package
74LVCH series
16 Bits
74LVCH16373 family
48 pin count
48 pins
SN74LVCH16373ADGGR Applications
There are a lot of Texas Instruments SN74LVCH16373ADGGR Latches applications.
- Parallel data synchronization
- Shift Registers
- Digital bus buffer
- Shift right register
- Phase comparator
- Counter control
- Stacked or Push-Down Registers
- Shift left with parallel loading
- Counters
- Frequency
