SN74LVCH16373ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74LVCH16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 4.2 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | INDEPENDENT CONTROL |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVCH16373ADGVR Overview
48-TFSOP (0.173, 4.40mm Width) contains it. The package is in the form of Cut Tape (CT). It uses Tri-State as its output configuration. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 1.65V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74LVCH series. With this electronic part, there are 16 bits. As far as this device is concerned, it has no terminations. 74LVCH16373 is its family. With the supply voltage set at 1.8V, it is able to operate. With 48 pins, it is equipped. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. The 48 pins are designed into it. Surface Mount is used to mount this electronic part. This device has 2 ports that can be connected to it. Subcategory FF/Latches contains this part. It is recommended that the supply voltage (Vsup) be greater than 1.65V. The device's reliable performance makes it a good choice for TR. As the output current is 24mA, the design flexibility is maximum. A binary equivalent of the input line is generated by the 3 output lines. There are no external factors that affect it, so it consumes 20μA quiescent current. The superior flexibility of this circuit can be attributed to the use of 8 circuits.
SN74LVCH16373ADGVR Features
48-TFSOP (0.173, 4.40mm Width) package
74LVCH series
16 Bits
74LVCH16373 family
48 pin count
48 pins
SN74LVCH16373ADGVR Applications
There are a lot of Texas Instruments SN74LVCH16373ADGVR Latches applications.
- General-Purpose Register
- Watches
- OC-48 communication systems
- Stacked or Push-Down Registers
- Network Switches
- Registers
- Ring counter
- Phase comparator
- Flip-flops
- Counter
