SN74LVCH16373ADL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVCH16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 6.3 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | INDEPENDENT CONTROL |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVCH16373ADL Overview
Package 48-BSSOP (0.295, 7.50mm Width) includes it. It is packaged in the way of Tube. Tri-State is the output configured for it. There is D-Type Transparent Latch logic type for this electrical device. A Surface Mount mount is used for mounting this electronic part. A 1.65V~3.6V supply voltage is required to operate it. The operating temperature is -40°C~85°C. In the 74LVCH series, this FPGA is located. There are 16 bits in this electronic part. The device consists of 48 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74LVCH16373. With the supply voltage set at 1.8V, it is able to operate. It is equipped with 48 pin count. This electronic device belongs to the family of LVC/LCX/Z. There are 48 pins on it. Surface Mount is used to mount this electronic part. 2 ports are available on this device. FF/Latches is the subcategory of this part. It is recommended that the supply voltage (Vsup) be greater than 1.65V. The output current of 24mA makes it feature maximum design flexibility. There are 3 output lines that correspond to the binary equivalents of the input line. As far as external factors are concerned, it consumes 20μA of quiescent current without getting affected by them. 8 circuits enable it to achieve high performance.
SN74LVCH16373ADL Features
48-BSSOP (0.295, 7.50mm Width) package
74LVCH series
16 Bits
74LVCH16373 family
48 pin count
48 pins
SN74LVCH16373ADL Applications
There are a lot of Texas Instruments SN74LVCH16373ADL Latches applications.
- Programmable binary
- Hammer Device Information
- Lamp and Display (LED)
- Parallel Input
- Phase comparator
- Frequency dividing
- Sample and hold register
- Pattern generators
- A/D converters
- Parallel Output
