Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
48 |
Weight |
600.301152mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74LVCH |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.635mm |
Base Part Number |
74LVCH16373 |
Pin Count |
48 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
1.65V |
Number of Circuits |
16 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
6.3 ns |
Quiescent Current |
20μA |
Turn On Delay Time |
2.1 ns |
Family |
LVC/LCX/Z |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
INDEPENDENT CONTROL |
Independent Circuits |
2 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
15.88mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LVCH16373ADLG4 Overview
48-BSSOP (0.295, 7.50mm Width) contains it. Tube is the way in which it is packaged. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. There is no supply voltage for this device. It operates at -40°C~85°C degrees Celsius. This FPGA is part of the 74LVCH series. It is designed with 8 bits. As far as this device is concerned, it has no terminations. 74LVCH16373 is its family. The device is operated when the supply voltage is set to 1.8V. With 48 pins, it is equipped. LVC/LCX/Z is the family name of this electronic device. 48 pins are used in its design. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches includes this part. During this period, the maximum supply voltage (Vsup) reaches 3.6V. The device is powered by 3.3V power supplies. Ensure that the supply voltage (Vsup) is greater than 1.65V. With 24mA, maximum design flexibility is ensured. It consumes 20μA of quiescent current without being affected by outside factors. The superior flexibility of the system is achieved through its use of 16 circuits.
SN74LVCH16373ADLG4 Features
48-BSSOP (0.295, 7.50mm Width) package
74LVCH series
8 Bits
74LVCH16373 family
48 pin count
48 pins
3.3V power supplies
SN74LVCH16373ADLG4 Applications
There are a lot of Texas Instruments SN74LVCH16373ADLG4 Latches applications.
- Ring counter
- Multi-line decoders
- Stacked or Push-Down Registers
- Serial Output Register
- Address register
- Phase comparator
- Instrumentation
- Shift left with parallel loading
- General-Purpose Register
- Registers