SN74LVCH16373AZQLR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.28662mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVCH16373 |
| Pin Count | 56 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | INDEPENDENT CONTROL |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVCH16373AZQLR Overview
In the 56-VFBGA package, it can be found as an embedded module. Tape & Reel (TR) is the way it is packaged. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. The way in which this electronic part is mounted is Surface Mount. A 1.65V~3.6V voltage supply is required for operation. It is -40°C~85°C at the operating temperature. The 74LVCH series contains FPGAs of this type. It is designed with 8 bits. A device such as this has 56 terminations designed. It is a member of the 74LVCH16373 family. With the supply voltage set at 1.8V, it is able to operate. The device is equipped with 56 pins. It is part of the family of electronic devices called LVC/LCX/Z. With the design of the board, there are only 56 pins. A Surface Mount mounting method has been used for this electronic part. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 3.6V. There is 3.3V power supply for it. (Vsup) should be greater than 1.65V. There are electronic circuits attached to the 16 input lines. Considering the reliability of this device, it would be a good candidate for TR. Its output current of 24mA ensures maximum design flexibility.
SN74LVCH16373AZQLR Features
56-VFBGA package
74LVCH series
8 Bits
74LVCH16373 family
56 pin count
56 pins
3.3V power supplies
SN74LVCH16373AZQLR Applications
There are a lot of Texas Instruments SN74LVCH16373AZQLR Latches applications.
- Shift Registers
- Relay
- High-speed logic
- Shift right with parallel loading
- Automatic test equipment
- Audio and video switching
- Phase comparator
- Automotive Infotainment
- A/D and D/A conversion
- Pattern Generators
