SN74LVCH16374ADLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVCH16374ADLR Overview
As a result, it is packaged as 48-BSSOP (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. This output is configured with Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis used as the supply voltage. Currently, the operating temperature is -40°C~125°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74LVCH series. This D flip flop should not have a frequency greater than 150MHz. A total of 2elements are contained within it. This process consumes 20μA quiescents. There have been 48 terminations. It is a member of the 74LVCH16374 family. A voltage of 1.8V is used as the power supply for this D latch. A 5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as LVC/LCX/Z. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 48 pins. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. An electronic part with 16bits has been designed. For normal operation, the supply voltage (Vsup) should be kept above 1.65V. Due to its reliability, this T flip flop is well suited for TR. The D flip flop is embedded with 2ports. As a result of its output current of 24mA, it is very flexible in terms of design. There are no output lines on the JK flip flop. This input has 8lines in it.
SN74LVCH16374ADLR Features
Tape & Reel (TR) package
74LVCH series
48 pins
16 Bits
SN74LVCH16374ADLR Applications
There are a lot of Texas Instruments SN74LVCH16374ADLR Flip Flops applications.
- Data storage
- Data Synchronizers
- Modulo – n – counter
- Reduced system switching noise
- Safety Clamp
- Guaranteed simultaneous switching noise level
- Count Modes
- Shift registers
- Digital electronics systems
- Buffer registers
