SN74LVCH32373AGKER
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVCH |
| JESD-609 Code | e0 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 96 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | BUS HOLD INPUTS ELIMINATE THE NEED FOR EXTERNAL PULLUP/PULLDOWN RESISTORS |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Base Part Number | 74LVCH32373 |
| Pin Count | 96 |
| Output Type | Tri-State |
| Number of Elements | 4 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Propagation Delay | 5.3 ns |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVCH32373AGKER Overview
The package in which it is embedded is named 96-LFBGA. Cut Tape (CT) is the way in which it is packaged. It uses Tri-State as its output configuration. This electrical device has a logic type of D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A 1.65V~3.6V voltage supply is required for operation. A temperature of -40°C~85°C is set as the operating temperature. The 74LVCH series contains FPGAs of this type. 32 Bits are used in the design of this electronic part. In this device, there are 96 terminations that have been designed. As a member of the 74LVCH32373 family, it falls under that category. The device is operated when the supply voltage is set to 1.8V. 96 pins are included. It is part of the family of electronic devices called LVC/LCX/Z. It is designed with 96 pins. Surface Mount is the method used for mounting this electronic part. This device has 2 ports. In the subcategory Bus Driver/Transceiver, this part belongs. Ensure that the supply voltage (Vsup) is greater than 1.65V. Based on its reliable performance, this device is appropriate for TR. A binary equivalent of the input line is generated by the 3 output lines. 4 elements are present in it. In addition to that, it is also characterized by BUS HOLD INPUTS ELIMINATE THE NEED FOR EXTERNAL PULLUP/PULLDOWN RESISTORS.
SN74LVCH32373AGKER Features
96-LFBGA package
74LVCH series
32 Bits
74LVCH32373 family
96 pin count
96 pins
4 elements
SN74LVCH32373AGKER Applications
There are a lot of Texas Instruments SN74LVCH32373AGKER Latches applications.
- Multi-line decoders
- Parallel Output
- A/D and D/A conversion
- Bus system register with enable parallel lines at bus side
- Registers
- Shift right register
- General-Purpose Register
- Audio and video switching
- Serial Output Data Queuing
- Storage
