SN74LVT573DBR
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Series | 74LVT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373; INPUTS CAN BE DRIVEN BY 3.3/5V DEVICES; BUS HOLD INPUTS |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 2.7 ns |
| Quiescent Current | 8.6mA |
| Turn On Delay Time | 3.5 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 4.3 ns |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
SN74LVT573DBR Overview
The 20-SSOP (0.209, 5.30mm Width) package contains it. Tape & Reel (TR) is the way it is packaged. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch for this electrical device. The electronic component is mounted according to the Surface Mount method. It operates with a supply voltage of 2.7V~3.6V. A temperature of -40°C~85°C is used for operation. In the 74LVT series, this FPGA is located. This electronic part is designed with 8 Bits. This device has 20 terminations. There is no doubt that it belongs to the family 74LVT573. In order to function, the supply voltage should be set to 3.3V. 20 pins are available on it. In terms of electronic devices, this one is in the LVT family. The 20 pins are designed into it. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports. In the subcategory Bus Driver/Transceiver, this part belongs. 3.6V is the maximum supply voltage (Vsup). In order to operate properly, the supply voltage (Vsup) should be greater than 2.7V. The device's reliable performance makes it a good choice for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 3.3V. 8 output lines generate the binary equivalent of the input lines. As far as external factors are concerned, it consumes 8.6mA of quiescent current without getting affected by them. In total, it has 1 elements. BROADSIDE VERSION OF 373; INPUTS CAN BE DRIVEN BY 3.3/5V DEVICES; BUS HOLD INPUTS are also a characteristic of it.
SN74LVT573DBR Features
20-SSOP (0.209, 5.30mm Width) package
74LVT series
8 Bits
74LVT573 family
20 pin count
20 pins
1 elements
SN74LVT573DBR Applications
There are a lot of Texas Instruments SN74LVT573DBR Latches applications.
- Double bus register system
- Sample and hold register
- Display
- Parallel data storage
- A/D and D/A conversion
- Communication systems
- Counter
- Hammer Device Information
- Automotive HEV/EV Powertrain
- Multistage ripple counting
