SN74LVT573PWR
| Parameters | |
|---|---|
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373; INPUTS CAN BE DRIVEN BY 3.3/5V DEVICES; BUS HOLD INPUTS |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 2.7 ns |
| Turn On Delay Time | 3.5 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 4.3 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
SN74LVT573PWR Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. A Tape & Reel (TR) package is used to package it. In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 2.7V~3.6V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. In the 74LVT series, this FPGA is located. An electronic part with 8 bits is designed. In this device, there are 20 terminations that have been designed. It belongs to 74LVT573 family. With the supply voltage set at 3.3V, it is able to operate. The device is equipped with 20 pins. It is part of the family of electronic devices called LVT. In addition, it is designed with a pin number of 20. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. There is a subcategory of FF/Latches for this part. During this period, the maximum supply voltage (Vsup) reaches 3.6V. In order to operate properly, the supply voltage (Vsup) should be greater than 2.7V. The device's reliable performance makes it a good choice for TR. High efficiency requires a voltage supply of 3.3V. The binary equivalent of the input line is generated by 8 output lines. This element consists of 1. Additionally, it is characterized by BROADSIDE VERSION OF 373; INPUTS CAN BE DRIVEN BY 3.3/5V DEVICES; BUS HOLD INPUTS.
SN74LVT573PWR Features
20-SOIC (0.295, 7.50mm Width) package
74LVT series
8 Bits
74LVT573 family
20 pin count
20 pins
1 elements
SN74LVT573PWR Applications
There are a lot of Texas Instruments SN74LVT573PWR Latches applications.
- Flip-flops
- Frequency dividing
- Accumulator Registers
- Parallel data storage
- Relay replacement
- Digital bus buffer
- Four-bit storage with output enable
- Instrumentation
- Parallel Input
- General-Purpose Register
