SN74LVTH125D
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVTH125 |
| Pin Count | 14 |
| Output Type | 3-State |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Propagation Delay | 2.1 ns |
| Quiescent Current | 4.5mA |
| Turn On Delay Time | 5.7 ns |
| Family | LVT |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 1 |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 7mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
SN74LVTH125D Overview
Logical driver uses a neat 14-SOIC (0.154, 3.90mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2.7V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74LVTH series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This electronic part belongs to the LVT family of parts. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74LVTH125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4.5mA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. To supply the device, a minimum voltage of 2.7V is a must. 4 channels for high quality communication. Wireless transceiver is able to output 3 lines. The typical output current of the logical driver is measured 64mA.
SN74LVTH125D Features
Bus Driver/Transceivers
SN74LVTH125D Applications
There are a lot of Texas Instruments SN74LVTH125D Buffers & Transceivers applications.
- Wireless multimedia center in smart home
- Notebook
- Ethernet circuitry
- Remote controls
- Desktop radio
- Switching system
- Radio transmission
- SONET/SDH Network
- Relays
- Clock radio
