SN74LVTH162244DLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 3.4 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 6.5 ns |
| Family | LVT |
| Logic Function | AND, Buffer, Inverting |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.012 A |
| Number of Bits per Element | 4 |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Control Type | ENABLE LOW |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.59mm |
| Length | 15.88mm |
| Width | 7.49mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVTH162244DLG4 Overview
Logical driver uses a neat SSOP package. Rail/Tube external packaging. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This electronic part belongs to the LVT family of parts. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceiver. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 5mA. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 12mA to its low level. In high level output mode, the electronic parts may conduct -12mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. Wireless transceiver is able to output 3 lines. It is known as a BUS DRIVER logic IC. It is sufficient to make 16 outputs.
SN74LVTH162244DLG4 Features
Bus Driver/Transceiver
High Level Output: 12mA
Low Level Output: -12mA
BUS DRIVER Logic IC
SN74LVTH162244DLG4 Applications
There are a lot of Texas Instruments SN74LVTH162244DLG4 Buffers & Transceivers applications.
- Cable network front end
- Bar, KTV wireless entertainment
- IPTV front end
- Precision engineering measurement
- Precision geodetic measurement
- Wireless smart house
- Changeing the frequency from IF to RF
- IP cameras
- AV receiver
- Notebook
