SN74LVTH162373DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVTH162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 16 |
| Propagation Delay | 3.1 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 3.4 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 4.6 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 1 |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH162373DGGR Overview
Package 48-TFSOP (0.240, 6.10mm Width) includes it. A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. It operates at a voltage of 2.7V~3.6V. It is -40°C~85°C at the operating temperature. The 74LVTH series is associated with this FPGA. This electronic part is designed with 16 Bits. As far as this device is concerned, it has no terminations. This type belongs to the 74LVTH162373 family. It operates with a supply voltage of 3.3V. It has 48 pins that makes it easy to use. In terms of electronic devices, this one is in the LVT family. There are 48 pins on it. The electronic part is mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. There is a subcategory of FF/Latches for this part. There are electronic circuits attached to the 1 input lines. This device is well suited for TR based on its reliable performance. It features maximum flexibility in design due to 12mA output current. For maximum efficiency, the supply voltage should be set to 3.3V. 3 output lines generate the binary equivalent of the input lines. The current consumed by the device is 5mA volts in quiescent mode, which cannot be affected by external factors. 8 circuits are used to provide this superior level of flexibility.
SN74LVTH162373DGGR Features
48-TFSOP (0.240, 6.10mm Width) package
74LVTH series
16 Bits
74LVTH162373 family
48 pin count
48 pins
SN74LVTH162373DGGR Applications
There are a lot of Texas Instruments SN74LVTH162373DGGR Latches applications.
- Buffer Storage
- Instrumentation
- Buffer/Storage Registers
- Counter timers
- Serial Output Register
- Parallel Input
- Display
- Address register
- Flip-flops
- Parallel data synchronization
