SN74LVTH16244AGRDR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 54-TFBGA |
| Number of Pins | 54 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 54 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH16244 |
| Pin Count | 54 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 2.3 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 5 ns |
| Family | LVT |
| Logic Function | AND, Buffer, Inverting |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Buffer, Non-Inverting |
| Control Type | ENABLE LOW |
| Number of Input Lines | 16 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 1.2mm |
| Length | 8mm |
| Width | 5.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVTH16244AGRDR Overview
Logical driver uses a neat 54-TFBGA package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2.7V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). All of the 4 elements are put into use. Digital buffer is one of the 74LVTH series devices. 54 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. There is a LVT family part that is attached to this electronic component. 54 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 54 pins. Enhanced with 2 ports. You can search "74LVTH16244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 5mA. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. To supply the device, a minimum voltage of 2.7V is a must. 4 bits are included within the electrical component. Wireless transceiver is able to output 3 lines. Because of its 16 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74LVTH16244AGRDR Features
Bus Driver/Transceivers
SN74LVTH16244AGRDR Applications
There are a lot of Texas Instruments SN74LVTH16244AGRDR Buffers & Transceivers applications.
- AV receiver
- Data center
- Thermal management
- Single to Multimode Fiber Conversion
- Indoor ad hoc meeting
- Cordless telephone
- Satellite communications networks
- Broadcast application
- Changeing the frequency from IF to RF
- Metro access rings
