SN74LVTH16373DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVTH16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 2.7 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 1 |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH16373DGGR Overview
48-TFSOP (0.240, 6.10mm Width) contains it. This package has the format of Tape & Reel (TR). It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. A 2.7V~3.6V voltage supply is required for operation. A temperature of -40°C~85°C is set as the operating temperature. The 74LVTH series contains FPGAs of this type. There are 16 bits in this electronic part. This device is designed with 48 terminations. As a member of the 74LVTH16373 family, it falls under that category. In order to operate it, the supply voltage must be 3.3V. There are 48 pins on it. This electronic device belongs to the family of LVT. This board has 48 pins on it, which is what it is designed for. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. The part belongs to the FF/Latches subcategory. It consists of 1 input lines from which an electronic circuit can be built. On the basis of its reliability, this device is well suited for TR. Due to its 64mA output current, it offers maximum design flexibility. For maximum efficiency, the supply voltage should be set to 3.3V. 3 output lines generate the binary equivalent of the input lines. There are no external factors that affect it, so it consumes 5mA quiescent current. In order to achieve its superior flexibility, 8 circuits are used.
SN74LVTH16373DGGR Features
48-TFSOP (0.240, 6.10mm Width) package
74LVTH series
16 Bits
74LVTH16373 family
48 pin count
48 pins
SN74LVTH16373DGGR Applications
There are a lot of Texas Instruments SN74LVTH16373DGGR Latches applications.
- Communication systems
- Up-Down Johnson
- Decade counting
- PCs and Notebooks
- A/D and D/A conversion
- Network Switches
- Counter
- Shift right with parallel loading
- Decade counting 7-segment decimal display
- Parallel Output
