SN74LVTH16373DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Frequency | 10MHz |
| Base Part Number | 74LVTH16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 2.7 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 1 |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH16373DL Overview
There is an embedded version of it in package 48-BSSOP (0.295, 7.50mm Width). A Tube package is used to package it. In its configuration, Tri-State is used as the output. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. It operates at a voltage of 2.7V~3.6V. A temperature of -40°C~85°C is used for operation. The 74LVTH series of FPGAs is the one this FPGA belongs to. An electronic part with 16 bits is designed. In this device, there are 48 terminations. There is no doubt that it belongs to the family 74LVTH16373. It operates with a supply voltage of 3.3V. The 48 pind are equipped with it. There is a device in this electronic family called LVT. With the design of the board, there are only 48 pins. It is mounted according to the Surface Mount method. In this device, there is a total of 2 ports available for use. This part is included in Bus Driver/Transceiver. Electronic circuits comprise 1 input lines. Due to its 64mA output current, it offers maximum design flexibility. High efficiency requires maintaining the supply voltage at 3.3V. There are 3 output lines that correspond to the binary equivalents of the input line. As far as external factors are concerned, it consumes 5mA of quiescent current without getting affected by them. The superior flexibility of the system is achieved through its use of 8 circuits.
SN74LVTH16373DL Features
48-BSSOP (0.295, 7.50mm Width) package
74LVTH series
16 Bits
74LVTH16373 family
48 pin count
48 pins
SN74LVTH16373DL Applications
There are a lot of Texas Instruments SN74LVTH16373DL Latches applications.
- PCs and Notebooks
- High-speed logic
- Network Switches
- Programmable binary
- Frequency
- Buffer register
- Multi-line decoders
- Display
- OC-48 communication systems
- Serial Output Data Queuing
