SN74LVTH16373DLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.4 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 3.8 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.59mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVTH16373DLG4 Overview
In the SSOP package, it is embedded. A package of Rail/Tube has been used. The design of this electronic part is based on 8 bits. In this device, there are 48 terminations that have been designed. In order to function, the supply voltage should be set to 3.3V. It has 48 pins that makes it easy to use. In terms of electronic devices, this one is in the LVT family. The pin configuration of the device is 48. Mounting this electronic component follows the Surface Mount method. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. Electronic circuits are represented by 16 input lines. In order to achieve high efficiency, the supply voltage should be kept at 3.3V. There are 2 elements in it. In order to operate properly, its maximum power current (ICC) should be 5mA. 64mA is set as the low level output current. -32mA is set as the high level output current. Operating temperatures should be below 85°C. It is recommended that the operating temperature be higher than -40°C. It supports a maximum supply voltage of 3.6V. With a minimum supply voltage of 2.7V, it operates. It uses the logic IC BUS DRIVER. With an output current of 64mA, it is highly flexible in terms of design.
SN74LVTH16373DLG4 Features
SSOP package
8 Bits
48 pin count
48 pins
2 elements
SN74LVTH16373DLG4 Applications
There are a lot of Texas Instruments SN74LVTH16373DLG4 Latches applications.
- High-speed logic
- Shift register
- Counters
- Automotive Infotainment
- Instrumentation
- Watches
- Shift Registers
- PCs and Notebooks
- Frequency
- Address register
